What BMW data is available in TELL Connect Car?

For BMWs, this includes odometer reading, fuel level, service information (time/distance remaining until service, oil change interval), fault codes, tire pressure, door and trunk status, as well as stopping points and routes. For electric/hybrid models, battery charge, range, charging mode and charging speed may also be available.

How reliable is the mileage data?

The odometer reading comes from the factory source, therefore it is particularly suitable for settlement purposes in leasing and car rental schemes.

How often is BMW data updated?

For newer BMW models, the update is typically tied to a start/stop event, or may occur in a cycle of approximately 2 minutes / 3 km. The exact behavior may vary by model.

Do all BMW models send the same data?

No. The range of available data may vary by model, year, and equipment. We will perform a compatibility check prior to launch to confirm the actual data set.

What advantages does it provide for electric BMW (EV) and plug-in hybrid models?

Battery charge, range and charging mode/speed may be available. This helps in planning utilization, optimizing charging and reducing vehicle operating risk.

Do I need to install anything in BMW vehicles?

No. TELL Connect Car provides data without installation, via BMW's factory data platform, so there are no installation risks or installation logistics.

Will TELL Connect Car replace GPS-based vehicle tracking for BMW fleets?

Not necessarily. If detailed position tracking and operational fleet management are your goal, easyTRACK is the one. TELL Connect Car is ideal if factory mileage, service and technical condition are more important, or if you want a mixed solution.

How does the BMW fleet introduction start?

We start with a compatibility check (based on model/year/fleet list), then activate the necessary functions and reports based on the available data.

Operations-supporting telematics System

For BMW
models

Factory data-based vehicle connection without installation

In the case of BMW models, TELL Connect Car takes over vehicle data directly from the factory on-board data platform, thus providing reliable, processable information about the status of the fleet without installation.

The available data may vary by model, but in the case of BMW, the operational and electrical data set is particularly strong.

Request a demo Speak with us today

Available BMW factory data

TELL Connect Car can receive and process the following data for BMW vehicles:

Data update

In the case of newer BMW models, the data update is tied to a start/stop event and occurs in a cycle of approximately 2 minutes / 3 km.

Odometer reading

Fuel level
(traditional, hybrid)

Battery charge
(hybrid, EV)

Range

Charging mode and speed (EV, hybrid)

Tire pressure

Doors, luggage compartment condition

Time remaining until serviceand kilometer

Oil change interval

Display error codes

Stopping points, routes

What does this mean in practice?

From the above data, the system is able to build:

Real-time mileage monitoring

Service monitoring and predictive maintenance alerts

Electric fleet status report

Early detection of technical errors

Operational status dashboard

NEW GENERATION CONTROL

Electric BMW models

For BMW electric and plug-in hybrid models, it is particularly valuable to have access to the following data:

Battery charge level

Charging method and speed

Current range

This has a direct impact on utilization, plannability and subsequent resale value.

BMW FLEET BY MARKET BREAKDOWN

What field do you work in?

Choose your activity - we'll show you how your BMW fleet benefits from the TELL Connect Car system.

I specialize in long-term vehicle rental I work in the vehicle rental industry

BMW FLEET

Long-term car rental: data-driven fleet management

TELL Connect Car ellenőrző

Szeretne biztosra menni? Ellenőrizze le, hogy az Ön gépjárműve kompatibilis-e a TELL Connect Car szolgáltatással. Ehhez a gépjármű alvázszámára lesz csupán szüksége.

(A gomb megnyomásával átnavigáljuk Önt egy új weboldalra.)

Lack of information is the biggest risk

The biggest risk of long-term car rental contracts is not a sudden breakdown, but a lack of timely information about the condition and use of the vehicles.

Continuous insight into fleet operations based on factory BMW data

Reliable, real-time information source for operational decisions

The condition for proactive rather than reactive fleet management

TELL Connect Car enables fleet management to operate consciously and in advance, rather than in a firefighting manner.

Kilometers and maintenance in one place

Accurate knowledge of mileage and service needs directly impacts the efficiency and costs of rental schemes.

Continuous monitoring of factory mileage for accurate management of contractual limits

Reduce manual data collection and administration

Predictability of service time and oil change interval

The timely availability of data avoids unexpected technical problems and vehicle outages.

Detailed data, faster response

Thanks to the detailed factory data range of BMW models, the system also displays information about the condition of the vehicles.

Real-time visibility and tracking of technical signals

Timely response to emerging problems

Dashboard based on factory data for more predictable operation

The system reduces operational risks, supports a higher level of customer service, and results in a more predictable, efficient rental structure.

Car rental fleets: quick turnaround, continuous availability

Availability is the foundation of business success

For car rental fleets, the key to profit is fast fleet turnover and continuous availability of vehicles.

Accurate mileage accounting for project management

Real-time visibility of the current status of vehicles

Early detection of technical problems to prevent downtime

To meet the essential conditions, accurate, reliable and timely data is required.

Less controversy, more credible data

TELL Connect Car provides a stable information base at every stage of the rental process based on factory BMW data.

Authentic mileage information for managing mileage-limited plans

Reducing disputes during returns

Early detection of technical signals and error codes for proactive intervention

Reducing the risk of unexpected downtime has a direct impact on fleet availability and revenue.

Electric models: charging, range, affordability

For electric BMW models, the system also displays battery and charging data, which directly supports fast fleet turnaround.

Real-time visibility of battery level and range

Charging data for strategic planning

Check availability immediately before your next rental

Knowing the current status of vehicles is particularly important for maintaining fast and smooth fleet turnover.

Accurate billing, more efficient operations, better customer experience

The system, built on factory data, simultaneously supports three key areas of car rental operations.

Accurate and reliable settlement basis in every rental cycle

More efficient fleet utilization through data-driven decisions

Better customer experience as a result of reliable and fast service

TELL Connect Car is therefore not only an operational tool, but also the basis for more profitable and predictable car rental operations.

Important information

For BMW vehicles , the range of available data may vary depending on model, year and equipment.
Not all types provide the same depth of data connectivity, so the exact data set is always finalized during a preliminary compatibility check.

TELL Connect Car works exclusively with the factory data set provided by BMW. The system does not require any retrofitting, does not modify the vehicle's electronics, and does not pose any warranty or technical intervention risks. The data comes from a reliable, factory source.

If you would like to know what you would see from your own BMW fleet today, request a personalized demonstration.

Contact us

Frequently asked questions

01
02
03
04
05
06
07
08

For BMW models